Bathrooms, explicitly showers and baths, are inclined to spills. Do you have a shower screen that saturates the floor when you use it? Perhaps the corners release each time you shower? On the off chance that you addressed indeed, you may have water harm to the dividers, baseboard, or the floor nearest to the shower.
Your screen could be somewhat to fault! In any case, don’t stress: it is something ordinary that typically occurs over the long run. Fortunately it has an answer and is basic.
At complete shower seal Newcastle as experts in shower screens that we are, we know how annoying it can be to suffer this problem and therefore, we want to help you solve this water leak. Discover how to seal a shower screen step by step and which silicone is the best to seal your shower. Pay attention!
8 steps to know how to seal the shower screen
In this easy-to-follow guide, we explain step-by-step how to seal a shower screen the right way to ensure you get a professional result. It is a simple but effective way to have your bathroom as new as the first day!
1. Remove the old silicone remains
The best way to remove old silicone sealant is with a utility knife, gently cutting through the silicone as much as you can. Be careful not to damage or scratch the surface.
Once you have removed most of the silicone from the bulkhead, at least a few small filaments will remain. Use your finger to rub it in or you can even use white spirit, just dab a little on an old rag and rub over the excess silicone until it comes off or dissolves.
2. Make sure the screen is dry
Take special care to check that the shower screen and the tray are completely dry, free of dirt and dust. If this is not the case, be sure to clean it well as it can cause the silicone to not grip well and reappear the same moisture problem when showering.
3. Select the appropriate aperture size
If you use the cartridge format, it is important that you make sure to cut the upper tip, being careful not to cut it too low since you could run out of thread. After this, put the cartridge in a silicone gun. Select the correct opening size so that the cord completely covers the space between the shower tray and the screen.
4. Cuts the cannula at a 45º angle
Cut the spray nozzle at a 45 degree angle; make sure the hole is not too large. The nozzle usually has markings that indicate where and how to trim the nozzle. The most common for most cases is a 5mm hole.
5. Make sure you do it evenly
Start at the inner corner of the shower tray, apply by pressing gently on the trigger of the glue gun and work your way up little by little in a continuous motion. It is important to do it evenly so as not to leave gaps between silicone and silicone. Do not apply too much, as it will be difficult to remove.
6. Wipe off excess silicone
Once you have completed each line of caulk, release the pressure from the caulk or it will continue to flow from the caulk nozzle. Wipe off the excess and replace the cap.
7. Smooth out the new silicone
Once the process is finished, smooth the silicone to prevent leaks. You can use a specific relaxer or a finger dipped in soapy water. Starting from where you first applied the sealer, apply gentle but steady pressure by pulling the tool or your finger along the tray to remove excess silicone, leaving an even bead.
8. Let the silicone dry
Fresh silicone sealant should be allowed to dry for a minimum of 24 hours before showering. This is the last step on how to seal a shower screen.
What silicone to use to seal the shower screen
One of the most important things in knowing how to seal a shower screen effectively is choosing the correct silicone.
For this, it must be of high quality, special silicone for bathrooms, in this way it will do its function in an excellent way. You can choose between transparent or white silicone, a silicone tube is usually more than enough.
It must have an anti-mold effect so that it does not deteriorate aesthetically shortly after it has been applied. By following all these steps, you will ensure that your bathroom, in addition to being practical, continues to look beautiful.