Categories Home Improvement

Top 5 Tips To Keep Your Vinyl Windows Looking New

The overall look of your house can be updated by maintaining the windows. Investing in a durable, efficient, and long-lasting material determines how long they will last, how well they function, and how good they look. Vinyl is considered to be one of the easiest window materials to maintain. With the proper upkeep, you can keep your vinyl windows looking new for years to come.

5 Tips To Keep Your Vinyl Windows Looking New

  • Clean the Tracks

One of the most important steps to ensure your vinyl windows are working correctly is by keeping the tracks clean. Dust and dirt build up over time which in turn puts added stress and affects its motion. It may also cause the rollers and hinges to wear out sooner. While cleaning the windows, make sure to clean the tracks first. If the glass cleaner drips into the tracks, it mixes with the dirt to form a muddy paste that is harder to clean. Brush out anything that is lodged in. Use soap water for scrubbing, and finally, remove any solution with a soft dry cloth.

  • Clean the Frame

The vinyl frames can become discoloured if they are not cleaned properly. Use a clean, soft cloth (like microfiber cloth), soap water, or mild detergent. Harsh chemicals and abrasive scrubbing can cause scratches and may damage the frame. Wipe the rim with clean water to remove soap residue. Use a dry cloth to dry the structure. For tougher stains, you may use a soft-bristle brush. Carry out the process for both the interior and exterior. Cleaning the frame should be done quickly, as too much water running down the edge may damage the vinyl.

  • Clean the Glass and the Screens

Avoid anything sharp like blades, abrasive cloths, or steel wool on the window glass. Use a glass cleaner and a lint-free cloth or microfiber cloth. Usage of harsh chemicals is a big no. Spray the solution and wipe the glass. A blackboard eraser may be used to polish the surface. Though window screens are not a part of your vinyl window, it is essential to clean them. Remove them carefully and place them on a flat surface. Use a cleaning solution to remove dirt and rinse with clear water. Dry the screens thoroughly before installing them back.

  • Lubricate the Hardware or Any Moving Parts

Avoid petroleum-based lubricants. Instead, use silicone-based lubricant sprays. To avoid over spraying, spray into a cloth and wipe down the critical areas. Lubricate your hardware whenever required.

  • Inspect the Windows

Along with convenience, safety is also necessary. During cleaning, make sure to examine every part of the vinyl window. Watch for condensation, make sure all the seals are intact, and test all the locks and latches. If there are any kind of warping, rot, or air leaks, consider a repair or window replacement.

Conclusion

Besides following the points mentioned above, handling the windows correctly is also a must. Many windows get damaged over time when used in the wrong way. Ask the window installer the correct way to handle the window or refer to any other source. After learning how to operate, enlighten other family members also about the same. With proper maintenance, the windows get longer life and look new.